[pox-dev] Fwd: Subnets and POX

[Windhya Rankothge]

Thanks alot and now its working fine..


On Tue, May 21, 2013 at 3:06 PM, Murphy McCauley
<murphy.mccauley at gmail.com>wrote:

> The problem here is with the host configurations.  Check the routing
> tables.
>
> For example, if you check the routing table on h1 (with "h1 route"),
> you'll see that it doesn't have any entry which can be used to route to
> 11.x.x.x.  The host never even tries to send the packet because it doesn't
> know where it should go.  You can fix it by, e.g., setting a default
> routing entry on each host (e.g., "h1 route add -net default h1-eth0").
>
> -- Murphy
>
> On May 21, 2013, at 5:53 AM, Windhya Rankothge wrote:
>
> > I am very new to POX and I am trying to create communication between two
> subnets.
> > ...
> >     h1 = net.addHost( 'h1', ip='10.0.0.2' )
> >     h2 = net.addHost( 'h2', ip='11.0.0.2' )
> > ...
> > I tried to run this topology with l3_forwarding example given in POX
> >
> > But the problem is I cant ping from h1 to h2..
> >
> > Is there something more that I have to do, to make this work ?
>
>


-- 
Best Regards,

Windhya Rankothge..... (WINDY)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noxrepo.org/pipermail/pox-dev-noxrepo.org/attachments/20130521/9b3159f8/attachment-0002.htm>