[pox-dev] Action change dstIP

[Silvia Fichera]

I've filtered of packets and I can see it ONLY if I choose "any" interface.
If I'm on a switch (the right switch) interface, I see nothing with that
filter. Without filter I can see only ARP, ICMP and UDP packets.


2013/7/23 Murphy McCauley <murphy.mccauley at gmail.com>

> A couple tips:
>
> Make you sure you're running wireshark on the right interface (e.g., the
> outgoing interface of the switch or the interface of the destination host).
>
> Make sure you are doing the output action AFTER you do the rewrite action.
>
> -- Murphy
>
> On Jul 23, 2013, at 2:48 AM, Silvia Fichera wrote:
>
>
> Hi all,
> I added in l3_learning the action of changeing dst IP with
>
> action.append.(of.ofp_action_nw_addr.set_dst(IPAddr(new_dstaddr)))
>
> where new_dstaddr is the new destination IP.
> How can I check if the action of changing dstip had success?
> In wireshark I've checked srcip and dstip of the ipv4 packet but the
> destination is unchanged...
>
> Thanks
> --
> Silvia Fichera
>
>
>


-- 
Silvia Fichera
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noxrepo.org/pipermail/pox-dev-noxrepo.org/attachments/20130723/7845e3b1/attachment-0002.htm>