[pox-dev] openflow, pox tplink

[Shabbir Ahmed]

dptcl doesnt show meaning full, when i run dpctl with ovs it shows a proper
table.

the switch ports or CAM table on the switch so i can verify, the table
uploaded to the switch or tp-link from openflow and it is the forwarding
thing.

ty,



On Fri, Feb 8, 2013 at 11:24 AM, Murphy McCauley
<murphy.mccauley at gmail.com>wrote:

> On Feb 7, 2013, at 10:19 PM, Shabbir Ahmed wrote:
>
> > thank you very much Murphy, right now my objective is learning the
> openflow with spending less amount, i think a real switch would be lot
> expansive so im restricted. ill try to make changes in the ....debug.py
> will try to block a src mac to a desitnation mac but im affraid the ping
> will still work  ... otherwise ill test all this on ovs and wait for a time
> when i have a openflow switch available to me.
>
> It's possible your switch can still act as a two or three port switch --
> like I said, the WAN/Internet port and the wireless are probably
> independent from the rest of the ports.
>
> > what would be the command on openwrt to look at the forwarding table?
>
> If you mean the OpenFlow flow table, maybe dpctl?  Or you can use POX to
> dump the table (look in the misc directory or at the POX wiki).
>
> -- Murphy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noxrepo.org/pipermail/pox-dev-noxrepo.org/attachments/20130208/9fe6f300/attachment-0001.htm>