[pox-dev] openflow, pox tplink

[Murphy McCauley]

Try putting the attached in the pox ext directory and then running ./pox.py log.level --DEBUG l2_pairs_debug

Do a ping test and post the log.

-- Murphy


On Feb 6, 2013, at 1:39 AM, Shabbir Ahmed wrote:

> Yes, I have two hosts connected to the switch and you're trying to ping across the switch. even if i dont ping the two hosts, as the it conntects to a controller it starts displaying this msg. the ping works but i think due to the switch's self learning process and not through OpenFlow bcaz in the absense of controller the ping should not work? am i right? I was recieving the same msg with mininet then i refreshed the git clone after which it started working, when i try to ping host in mininet it displays the mac addresses and then displays msg adding entry.
> 
> wat logs do you want me to send.
> 
> 1 more thing i can use enable_learning '0' in switch configuration on openwrt but it doesnt effect any thing, where i think of this statement as disable default learning of the switch. the switch chip installed is 'rtl8366rb'. I have a rb450g and i have ported the latest openwrt and followed pantou but same error.
> 
> thanks alot,
> Shabbir.
> 
> please...
> 
> 
> On Wed, Feb 6, 2013 at 1:03 PM, Murphy McCauley <murphy.mccauley at gmail.com> wrote:
> On Feb 5, 2013, at 11:52 PM, Shabbir Ahmed wrote:
> > I am trying to set up openflow, openwrt on tp-link, here i have issue, if i run pox forwarding.l2_learning with mininet it works fine, but when i try to use it on tp-link, it gives the following msg,
> >
> > port of (mac address of tplink switch) unknown --- flooding,
> 
> By itself, this message is not particularly meaningful -- it shows up when you run under Mininet too.
> Please post the rest of the log.
> When do you see this (that is, what are you trying to do when this happens)?
> Do you have two hosts connected to the switch and you're trying to ping across the switch?
> What else have you tried?  What does and does not work?
> Have you tried with the betta branch of POX?
> 
> Also, take a look through the troubleshooting section of the FAQ:
> http://tinyurl.com/helppox
> 
> -- Murphy
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noxrepo.org/pipermail/pox-dev-noxrepo.org/attachments/20130207/e0c91f13/attachment-0003.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: l2_pairs_debug.py
Type: text/x-python-script
Size: 3156 bytes
Desc: not available
URL: <http://lists.noxrepo.org/pipermail/pox-dev-noxrepo.org/attachments/20130207/e0c91f13/attachment-0002.bin>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noxrepo.org/pipermail/pox-dev-noxrepo.org/attachments/20130207/e0c91f13/attachment-0004.htm>