[pox-dev] openflow, pox tplink

[Shabbir Ahmed]

one more thing i haven't compiled openwrt with OVS, do i have to ? bcaz i
dont think we need to add ovs onto it



On Wed, Feb 6, 2013 at 4:45 PM, Shabbir Ahmed <shabbir1282 at gmail.com> wrote:

> root at OpenWrt:~# ps | grep of
>     3 root         0 SW   [ksoftirqd/0]
>  4367 root      1324 S    ofdatapath ptcp:6634 -i eth0.1 --no-local-port
> --pidfile -d 000000000001
>  4383 root      1064 S    ofprotocol tcp:127.0.0.1:6634 tcp:
> 192.168.1.2:6633 --fail=closed -D --pidfile=/var/run/ofprotocol.pid
> --out-of-band --listen=ptcp:
>  4391 root      1488 S    grep of
>
>
>
> On Wed, Feb 6, 2013 at 3:49 PM, Shabbir Ahmed <shabbir1282 at gmail.com>wrote:
>
>> >You can test this.  Try running POX without l2_learning.  Does the ping
>> work?  Then try running *with* >l2_learning.  Does the ping work?
>>
>> Connection is refused, or connects for some time and disconnects again no
>> error msgs other than closign connection
>>
>>
>> > wat logs do you want me to send.
>>
>> >Run POX.  Wait for it to connect.  Do a ping test.  Shut down POX.  Send
>> the entire POX log.
>> starting listen on 0.0.0.0:6633
>> prompt POX>
>> then the same msg flooding.
>>
>>
>> > 1 more thing i can use enable_learning '0' in switch configuration on
>> openwrt but it doesnt effect any thing, >where i think of this statement as
>> disable default learning of the switch. the switch chip installed is
>> >'rtl8366rb'. I have a rb450g and i have ported the latest openwrt and
>> followed pantou but same error.
>>
>> I don't really know much about this configuration.  The openflow-discuss
>> list (and Yiannis in particular) will have better ideas.
>>
>> >One thought I'd give is that it looks like you've got it configured for
>> in-band OpenFlow.  I'd suggest that it >may be a good idea to try to get
>> out-of-band OpenFlow working first.
>>
>> same error on outofbound as well.
>>
>>
>> On Wed, Feb 6, 2013 at 2:49 PM, Murphy McCauley <
>> murphy.mccauley at gmail.com> wrote:
>>
>>> On Feb 6, 2013, at 1:39 AM, Shabbir Ahmed wrote:
>>>
>>> > the ping works but i think due to the switch's self learning process
>>> and not through OpenFlow bcaz in the absense of controller the ping should
>>> not work?
>>>
>>> You can test this.  Try running POX without l2_learning.  Does the ping
>>> work?  Then try running *with* l2_learning.  Does the ping work?
>>>
>>> > wat logs do you want me to send.
>>>
>>> Run POX.  Wait for it to connect.  Do a ping test.  Shut down POX.  Send
>>> the entire POX log.
>>>
>>> > 1 more thing i can use enable_learning '0' in switch configuration on
>>> openwrt but it doesnt effect any thing, where i think of this statement as
>>> disable default learning of the switch. the switch chip installed is
>>> 'rtl8366rb'. I have a rb450g and i have ported the latest openwrt and
>>> followed pantou but same error.
>>>
>>> I don't really know much about this configuration.  The openflow-discuss
>>> list (and Yiannis in particular) will have better ideas.
>>>
>>> One thought I'd give is that it looks like you've got it configured for
>>> in-band OpenFlow.  I'd suggest that it may be a good idea to try to get
>>> out-of-band OpenFlow working first.
>>>
>>> -- Murphy
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noxrepo.org/pipermail/pox-dev-noxrepo.org/attachments/20130206/9466b8f8/attachment-0002.htm>