[pox-dev] Using POX controller with openwrt

[Sayed Qaiser Ali Shah]

I just want to confirm because I followed following links and none of them
work for me

http://danny270degree.blogspot.com/2012/06/openflow-update-and-setup-tp-link-tl.html

http://archive.openflow.org/wk/index.php/Pantou_:_OpenFlow_1.0_for_OpenWRT#Network_Configuration_2

I have POX controller on my laptop and I am assigning following IP's
Laptop having POX controller is connected to WAN port.
IP of WAN port of tp-link 1043 192.168.1.1
IP to my laptop as 192.168.1.10

IP of tp-link interface 0.1 192.168.2.1
IP of System connected to interface 0.1 is 102.168.2.10


IP of tp-link interface 0.2 192.168.2.2
IP of System connected to interface 0.1 is 102.168.2.20

I am running POX controller with IP address similar to my PC. I don't know
whether I am doing it right or wrong.
I am running pox controller with IP given below and I am also not sure
about port. I am just giving port 6633
sudo ./pox.py openflow.of_01 --address=192.168.1.10 --port=6633

When I tried to ping one host from another pox controller is still not
working. Can anybody please tell me how should I do this and am I using
correct IP networks??



On Wed, Dec 4, 2013 at 1:50 AM, Sayed Qaiser Ali Shah <
11msitqshah at seecs.edu.pk> wrote:

> Thanks I got it from the links which you provided by using "vi"
> Let me try.
> :)
>
>
> On Wed, Dec 4, 2013 at 1:47 AM, Sayed Qaiser Ali Shah <
> 11msitqshah at seecs.edu.pk> wrote:
>
>> Thank you so much for your help.
>> I have no idea how to enter /etc/config/openflow.
>> Can you please tell me. When I ssh the openwrt I tried "cd ~/etc" but
>> didn't work. How can I enter /etc? I have no idea about openwrt.
>>
>>
>> On Wed, Dec 4, 2013 at 1:30 AM, Alison Chan <chan7781 at kettering.edu>wrote:
>>
>>> HI Sayed,
>>> In /etc/config/openflow on the openwrt router, there will be a line
>>> that specifies the controller IP and port. Change that to the computer
>>> that's running pox, and run:
>>>
>>> /etc/config/openflow restart
>>>
>>> to make the switch talk to your pox instance.
>>>
>>> These links should also be of use to you:
>>>
>>>
>>> http://danny270degree.blogspot.com/2012/06/openflow-update-and-setup-tp-link-tl.html
>>>
>>>
>>> http://archive.openflow.org/wk/index.php/Pantou_:_OpenFlow_1.0_for_OpenWRT#Network_Configuration_2
>>>
>>> (Sorry for the lack of very specific answers, I'm not nearby our
>>> TL-WR1043NDs today.)
>>>
>>> Cheers,
>>> Alison
>>>
>>> On Tue, Dec 3, 2013 at 2:37 PM, Sayed Qaiser Ali Shah
>>> <11msitqshah at seecs.edu.pk> wrote:
>>> > Thanks Alison. It worked. Do you have idea how to use POX with openwrt?
>>> >
>>> >
>>> > On Wed, Dec 4, 2013 at 12:31 AM, Alison Chan <chan7781 at kettering.edu>
>>> wrote:
>>> >>
>>> >> Did you set a root password in the openwrt box? If so, then you need
>>> >> to use ssh instead of telnet to log into it.
>>> >>
>>> >> Cheers,
>>> >> Alison
>>> >>
>>> >> On Tue, Dec 3, 2013 at 2:29 PM, Sayed Qaiser Ali Shah
>>> >> <11msitqshah at seecs.edu.pk> wrote:
>>> >> > Hello Everybody,
>>> >> >
>>> >> > I want to use POX controller with openwrt which I have installed on
>>> >> > TP-Link
>>> >> > WR1043ND. I searched for it but didn't work for me. I am new to
>>> openwrt.
>>> >> > I
>>> >> > tried to telnet my TP-Link device but it didn't log in. When I
>>> checked
>>> >> > Telnet in browser, it is enabled. I got this:
>>> >> >
>>> >> > Trying 192.168.1.1...
>>> >> > Connected to 192.168.1.1.
>>> >> > Escape character is '^]'.
>>> >> > Login failed.
>>> >> > Connection closed by foreign host.
>>> >> >
>>> >> > Can anybody help me how can I use pox controller with openwrt???
>>> >>
>>> >>
>>> >>
>>> >> --
>>> >> Alison Chan
>>> >> chan7781 at kettering.edu
>>> >> +1 909 278 7753
>>> >>
>>> >> Sedulously eschew obfuscatory hyperverbosity or prolixity.
>>> >
>>> >
>>> >
>>> >
>>> > --
>>> > Regards
>>> >
>>> > Sayed Qaiser Ali Shah
>>> > MSIT-12
>>> > NUST (SEECS)
>>>
>>>
>>>
>>> --
>>> Alison Chan
>>> chan7781 at kettering.edu
>>> +1 909 278 7753
>>>
>>> Sedulously eschew obfuscatory hyperverbosity or prolixity.
>>>
>>
>>
>>
>> --
>>
>>
>>
>>
>> *Regards Sayed Qaiser Ali ShahMSIT-12 NUST (SEECS)*
>>
>
>
>
> --
>
>
>
>
> *Regards Sayed Qaiser Ali ShahMSIT-12 NUST (SEECS)*
>



-- 




*RegardsSayed Qaiser Ali ShahMSIT-12NUST (SEECS)*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noxrepo.org/pipermail/pox-dev-noxrepo.org/attachments/20131210/9698e090/attachment-0002.htm>